Huawei RTN510 Configuration Manual page 11

Configuration Example
Configuration Example of the RTN510 AP on the Aggregation Node
1. Enable the DHCP server function, and configure the IP address pool and DHCP gateway IP address as
planned.
2. Modify the management VLAN ID. (If the default VLAN 4094 is occupied, perform this operation.)
HUAWEI TECHNOLOGIES CO., LTD.
Configuration Example of the RT Site
1. Enable the DHCP client function on the RTN510 RT.
2. Enable the DHCP client function on the PowerCube 500.
Huawei Confidential Page 11