Huawei RT-NE20E-RPU-512M Specifications

Quidway® NetEngine 20E Router RPU
Quidway® NetEngine 20E Router Routing Process Unit
Overview
The routing process unit (RPU) is the main control board of an NE20E router. It consists of
PowerPC processor, system controller bridge, memory and other accessories. This board can be
used to control ports, manage equipment and process software protocols.
The RPU has two GE interfaces, each of which can provide electrical or optical interfaces. To use
the two GE interfaces at the same time, you need to select the same type of interface (electrical or
optical). The system identifies the interfaces according to the connection wire (cable or fiber).
In addition, the RPU provides one Console port, one AUX port and one 10/100 BASE-TX
debugging network port and reserves an interface for CompactFlash CARD.
Specifications
Refer to the table below for specifications of RPU.
Module
RT-NE20E-RPU-512M
Interface properties
Refer to the table below for properties of a Console port.
Property
Connector type
Interface type
Baud rate
Copyright ©2007 Huawei Technologies Co., Ltd. All Rights Reserved.
http://datacomm.huawei.com
Interface
RPU providing 512 M memory and two FE/GE
RJ45/SFP
interfaces
RJ45
RS-232
9600 bps ~ 115200 bps
Default value: 9600 bps
Description
Description
1