Installation Of The "Type C" Cabinet - Whelen Engineering Company IPS 400 Product Manual

5.3a Installation of the "Type C" Cabinet
For "Type C" cabinet installation only
The IPS cabinet is typically mounted to an inside wall of a building. The cabinet is equipped with two mounting
flanges on the top and two mounting flanges on the bottom, as shown in the drawing. The top flanges have two
7/16" holes and the bottom flanges have two 7/16" slots, in order to accommodate 3/8" hardware. The holes are
on 14" centers.
The IPS-400 and the IPS-800 are the same size, however, with a "Type C" cabinet the IPS-400 weighs
approximately 150 pounds and the IPS-800 weighs approximately 190 pounds.
Be sure to allow enough room to fully open the cabinet doors. Also, make sure there is room for conduit and
wiring, typically on the left side of the cabinet.
51.8
MOUNTING FLANGES
WITH 7/16" HOLES
49.8
12.3
3.0
Mounting Details
20.0
14.0
(TYP. BOTH ENDS)
18
50.6
MOUNTING FLANGES
WITH 7/16" OPEN SLOTS