Step 2.8 Fixing The Installation Plate - Samsung AR RXFP Series Installation Manual

Step 2.8 Fixing the installation plate

You can install the indoor unit on a wall, window
frame, or gypsum board.
WARNING
• Make sure that the wall, window frame, or
gypsum board can withstand the weight of the
indoor unit. If you install the indoor unit in a place
where it is not strong enough to withstand the
unit's weight, the unit could fall and cause injury.
When fixing the indoor unit on a wall
Fix the installation plate to the wall giving attention
to the weight of the indoor unit.
Plastic anchor
Wall
20 mm
Model
**07*******
**09*******
**12*******
**18*******
**24*******
NOTE
• If you mount the plate to a concrete wall using
plastic anchors, make sure that gaps between the
wall and the plate, created by projected anchor, is
less than 20 mm.
When fixing the indoor unit on a window frame
1 Determine the positions of the wooden uprights
to be attached to the window frame.
2 Attach the wooden uprights to the window frame
giving attention to the weight of the indoor unit.
3 Attach the installation plate to the wooden
upright using tapping screws.
18 English
(Unit : mm)
A B C D
30 96 38 30
38 126 70 38
Pipe bundle hole: Ø 65 mm
When fixing the indoor unit on a gypsum board
1 Use stud finder to find out locations of the studs.
2 Fix the plate hanger on two studs.
CAUTION
• If you fix the indoor unit on a gypsum board, use
only specified anchor bolts on reference positions.
Otherwise, the gypsum surrounding the joints
may crumble over time and cause the screws
to be loosened and stripped. This may lead to
physical injury or equipment damage.
• Search for other spots if there are less than two
studs, or the distance between the studs are
different from the plate hanger.
• Fix the installation plate without inclining to one
side.