SECTION 82 - FRONT LOADER (BOOM AND MOUNTING PLATE)
8. Remove the pin retaining hardware and pin from
the link and main boom. Lower the link and rest
it on the loader frame.
9. Loosen the right and left upper link rear retaining
bolts, 1; do not remove. With a soft-faced sledge
hammer, strike the link at 2, to break the tapered
pivot pin loose in the main boom.
10. Remove the hardware and pins from the ROPS
and link, resting the link on the lower link.
11. Lift the boom assembly from the loader.
82-23
51
52