New Hydraulic System Pump/High Flow Pump Installation - New Holland LS160 Manual

9. Turn the suction tube fitting, 1, down and install
the suction tube, 2. Tighten all hydraulic connec-
tions securely.
NEW HYDRAULIC SYSTEM PUMP / HIGH
FLOW PUMP INSTALLATION
1. Remove the through bolts, 1, and washers.
2. Separate the pumps at 2, taking care not to dis-
turb the seals between the pump bodies and
backplates.
3. Remove the small round drive key, 1, from the
pump shaft, 2, and remove the drive gears, idler
gears, and wear plates from the pumps, taking
care not to disturb the seals between the pump
body and backplate.
IMPORTANT: The small round key must be removed
to remove drive shaft from center section. Do not lose
key.
SECTION 35 - HYDRAULIC SYSTEM
19998082
19997790
19997791
35-72
1
2
2
2
1
117
1
118
119