Connecting The Ccu-590/590P To The Video Camera; Notes On Connections - Sony CCU-590 Operation Manual

Connecting the CCU-590/590P to the Video Camera

When connecting a CCU-590/590P to a BVP-E10/E10P/
E10WS/E10WSP/E30/E30P/E30WS/E30WSP Color
Video Camera, you must first attach the CA-570/570P/
590/590P Camera Adaptor to the video camera.
Triax cable
CCU-590/590P

Notes on connections

Triax cable
The triax cable should never be connected to or
disconnected from the CCU-590/590P when the power is
turned on. Always turn the unit off first.
BKP-9057
To an AC power source
A large lens and the BVF-77/77CE 7-inch Viewfinder are
connected to the CCU-590/590P through the CA-905K/F/
T/L series large-lens adaptor and the BKP-9057
Viewfinder Saddle, as shown in the illustration below.
CA-570/570P/590/590P
BVP-E10/E10P/E10WS/E10WSP/
E30/E30P/E30WS/E30WSP
When a large lens is used
BVF-77/77CE
CA-590/590P
BVP-E10/E10P/E10WS/E10WSP/
E30/E30P/E30WS/E30WSP
CA-905K/F/T/L
Notes
• The maximum power output from the CAMERA connector of
the CCU-590/590P is 110 watts (including a maximum cable
loss of 10 watts). Do not connect any equipment which
consumes more than 110 watts of power.
• The BVF-7700/7700P Color Viewfinder cannot be used
because of the power output rating mentioned above.
Video camera
Some switches or controls on the video camera may not
work when the camera is connected to the CCU-590/590P.
For details, refer to Operation Manuals of the video
camera and the camera adaptor.
Connecting the CCU-590/590P to the Video Camera
11