M Stopper Solenoid Position Adjustment
5.7.25. MIC Rail Unit Replacement
(Removal of MIC Rail Unit)
1. Remove the top panel.
2. Remove the front loading unit.
3. Remove the bottom panel. (Refer to the bottom panel removal.)
4. Remove the connector P17 on the Mech. Interconnection board.
5. Remove the MIC Drive REV Spring.
6. Remove 3 screws and remove the MIC Rail Unit.
(Installation of MIC Rail Unit)
1. Install a new MIC Rail Unit as reverse order of its installation.
2. Confirm that M and L cassette touches MIC Rail Unit.
MIC Rail Unit Removal
5.7.26. Reel Drive Motor Unit Replacement
(Removal of Reel Drive Motor Unit)
1. Remove the top panel.
75