Video Menu - Panasonic DVC PRO Studio AJ-D950P Service Manual

USER menu
<VIDEO>
No.
613
614
617
The underline on the setting item denotes the initial setting.
(continued)
Item Setting
Superimposed Superimposed
No.
display display
VIN SETUP 0000
0001
Pb/Pr OUT 0000
LV 0001
WFM SEL 0000
0001
0002
0003
0004
0005
0006
0007
– 57 –
THRU
This selects whether the composite signal is to be recorded
with setup or without setup.
CUT
0: When recording signals with no setup.
1: When recording signals with 7.5% setup.
<Notes>
•
This setup menu is not displayed in the 625 mode.
•
When recording composite signals, be sure to double-check
whether the signals are to be recorded with or without setup.
M II This selects the analog component output level.
0: M II level
B-CAM
1: ß-CAM level
<Note>
This setup menu is not displayed in the 625 mode.
CTL This selects the signal to output from the VIDEO OUT2
connector.
TC
0: The CTL signal is output.
VIDEO
1: The TIME CODE signal is output.
SYNC
2: The VIDEO OUT signal is output.
RF-L
3: The SYNC signal is output.
RF-R
4: The PB L RF signal is output.
ENV-L
5: The PB R RF signal is output.
ENV-R
6: The PB L ENV signal is output.
7: The PB R ENV signal is output.
Description