Executing Automatic Editing - Panasonic DVC PRO Studio AJ-D950P Service Manual

Automatic editing

Executing automatic editing

1
Postroll
With assemble editing, editing continues for approx. 2 seconds even after the edit OUT point
has been passed, the tape is rewound to the OUT point, and the unit goes into the stop
mode.
With insert editing, the unit goes into the play mode after the edit OUT point has been
passed, the tape is rewound to the OUT point, and the unit goes into the stop mode.
Retry function
If the AUTO EDIT button is pressed again after the STOP button has been pressed to stop
the editing, editing will start again from the beginning.
Auto tag editing
If the AUTO EDIT button is pressed when the next edit point has not yet been entered upon
completion of editing, the previous edit OUT point will be entered as the IN point, and editing
is performed accordingly.
To release the auto tag mode, press one of the tape transport buttons (PLAY, etc.).
<Note>
•
The entered points are automatically cleared after editing is executed. However, the
previous editing points can be recalled by pressing the TRIM+ (or TRIM–) and SET buttons
together.
Press the AUTO EDIT button.
Automatic editing is now performed.
•
To stop the editing at any time, press the STOP button.
•
When the edit OUT point is reached, the unit goes into the stop mode after postrolling.
ON
OFF
POWER
METER
FULL/FINE
L
MONITOR SELECT
R
LEVEL CH1 CH2 CH3 CH4
HEADPHONES
PULL
OPEN PULL FOR VARIABLE
– E-39 –
INPUT SELECT
VIDEO Y PB PR CMPST SDI
SDTI(V&A)
AUDIO ANALOG AES/EBU USER SET SDI
CH CONDITION
TC SET
SHIFT ADJ START
DVCPRO SCH CF
W
CUE
ASSEM VIDEO CH1 CH2 CH3 CH4 CUE
INSERT
REC PREVIEW A
AUTO EDIT
REVIEW
PREROLL IN – +
TRIM
V
SET
IN
PB
1
TC MODE CONTROL
TC INT TAPE REMOTE
JOG
TC/CTL
REV
UB EXT EE LOCAL
STAND BY PLAYER RECORDER
RESET
SERVO REC INHIBIT
TC EDIT PLAY REC
A
OUT
REW STOP FF
V
OUT
EJECT
AUTO OFF
PUSH
SHTL
SLOW
FWD
PULL
OPEN