Panasonic DVC PRO Studio AJ-D950P Service Manual page 558

USER menu
<EDIT>
No.
308
309
310
311
312
313
314
315
316
The underline on the setting item denotes the initial setting.
(continued)
Item Setting
Superimposed Superimposed
No.
display display
EDIT 0000
RPLCE4 0001
0002
0003 CH1+CH2
EDIT 0000
RPLCEC 0001
0002
0003
CONFI 0000
EDIT 0001
AUD EDIT 0000
IN 0001
AUD EDIT 0000
OUT 0001
AUTO 0000
ENTRY 0001
CF ADJ 0000 PLAYER
SEL 0001 RECORD
AFTER 0000
CUE-UP 0001
JOG RANGE 0000
0001
– 53 –
N-DEF The same type of setting as No. 305. This selects the channel
concerned when the VTR CH4 edit preset is set in compliance
CH1
with the ON or OFF presetting for the analog audio signals
CH2
designated by the controller.
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with analog CH1 or CH2 edit preset.
N-DEF This selects the channel concerned when the VTR CUE edit
preset is set in compliance with the ON or OFF presetting for
CH1
the analog audio signals designated by the editor or controller.
CH2
0: Not set.
CH1+2
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with either analog CH1 ot CH2 edit preset.
OFF This selects whether to conduct simultaneous playback while
editing is in progress.
ON
0: No simultaneous playback
1: Simultaneous playback
<Note>
Simultaneous playback is valid when the TAPE/EE switch is
set to TAPE.
CUT This selects the connection method for the digital audio edit IN
point.
FADE
0: Cut processing
1: V Fade processing
This selects the connection method for the digital audio edit
CUT
OUT point.
FADE
0: Cut processing
1: V Fade processing
DIS This selects whether the IN point is to be entered using the
PREROLL button when it has not been entered.
ENA
0: IN point is not entered.
1: IN point is entered.
This selects the CF adjustment deck with deck-to-deck
editing.
0: The player's edit IN/OUT points are adjusted. (reference as
the RECORDER side)
1: The recorder's edit IN/OUT points are adjusted. (reference
as the PLAYER side)
This selects the mode after cue-up operation is complete.
STOP
0: STOP mode
STILL
1: SHTL STILL mode
–.43~1 This sets the range of the JOG speed during 9P remote
operation.
–4~+4
0: Plays at –0.43 to +1 speed range
1: Plays at the ±4.1 speed range
Description