3-7-30. Thrust Screw Replacement and
Adjustment
1.
Remove the Thrust Screw.
2.
Supply oil (VFK0906) as shown in the figure and set
the capstan housing.
3.
While rotating the capstan shaft CCW tighten the
thrust screw CW slowly and stop it when the rotation
becomes smoothly.
4.
Rotate another 180 degrees or 270 degrees from
the stop position of item 3.
5.
Grew the thrust screw.
6.
Confirm the oil seal as shown in figure.
Thrust Screw
Oil Seal
Thrust Screw
Oil
270°
225° 180°
Capstan Housing
0°