Troy-Bilt Horse Owner's Manual page 19

(Photo 1/5A) Tighten air cleaner screws.
H. For 6 HP Tecumseh Engines Only- To install
the sponge air cleaner on your engine:
(1) loosen screws (2) place cover over air clean-
er base
(see
Photo 1/5) and turn cover clock-
wise
so
that screws move into narrow slots
(3) tighten screws to prevent air leaks between
the two parts-see Photo 1/5A.
....
_-----'
F.
(Photo 1/3C) Grasp the Depth Regulator
handle (the lowest lever in rear, center) and lift
and roll the tiller off the container base. If the
wheels won't turn, move the Wheel Speed Se-
lect Lever (on the right) a short distance to free
the wheels.
E.
(Photo 1/38) Once the top fiberboard is cut
and removed, you can hit the remaining por-
tions off with
a
mallet,
as
shown.
G. (Photo 1/4) The Forward/Reverse Lever and
its clutch pawl spring are shown above removed
from the shipping container. The lever may be
tucked between the inner and outer walls of the
container-shown by arrow in Photo 1/1.
I