Identification Of Controls - Hayter MT313 Operator's Manual

1.26

IDENTIFICATION OF CONTROLS

1.
Parking / emergency brake lever.
2. Working light switch.
(supplied with lighting kit, Not Shown).
3.
Warning beacon switch
(supplied with beacon kit, Not Shown).
4. Switch blanking cover. (removed when fitting
(2) and (3) above)
5.
Cutterhead position controls.
6.
Throttle control lever.
7. Ignition switch with key.
8. Cutterhead drive switch.
9.
Weight Transfer adjuster.
10. Fuse Box
11. Horn button.
12.
Steering column adjustment lever.
13.
Warning/gauge control display unit.
14. Hydraulic oil overheat warning light.
15. Engine low oil pressure warning light.
16.
Battery low charge warning light.
17.
Engine coolant overheat warning light.
18. Engine glow heater timer light.
19. Cutterhead drive-off warning light.
20.
Parking / emergency brake ON warning light.
21.
Transmission neutral indicator light.
22. Steering Wheel
23. Reverse travel pedal.
24.
Centre cutterhead transport latch.
25.
Left hand cutterhead transport latch.
26. Right hand cutterhead transport latch.
27.
Forward travel pedal.
28.
Fuel level / Engine coolant temperature gauge.
29. Fuel level / Engine temperature toggle button.
30. Hour meter / Time clock
31.
Hour meter / Clock toggle button.
32.
Forward travel speed backstop lever.
33. Front platform latch
OPERATING THE MOWER
5
7
6
10
18 28 15
17
90
0
40 140 C
0
1
16
P
D
N
19
31 30 29
24
22
12
1
32
33
26
25
995901PM140404A
1.26
8
11
13
4
9
14
20
21
23
27