Advertisement
LAN Configuration
By default, "LAN Config" is set to "Automatic IP". This will allow the
NAS2XU2 to obtain its IP address automatically. If you prefer setting it
manually, select the static IP option, enter your own value and click
"Apply" to confirm the new setting.
Disk Utility
In this page, you can manage hard disk settings of the USB storage
device.
Format: For first time installation, you need to format hard disk into
FAT32 file system. Formatting the drive will erase all data on the
hard drive.
Warning: For hard drives with data on it, create a backup before
proceeding to format the hard drive!
Tip: You can transfer back the backup data to the NAS Public folder
for sharing via the network or USB connection of the USB Storage
device.
Sleep Time: This is to select hard disk sleeping mode.
Scan Disk: After the scan, it will show file content information and
health status for the hard disk.
To access Samba PUBLIC folder of NAS2XU2 in Windows
Click on the Windows icon located on the bottom left corner of the
screen, on the "Search programs and files" \\ followed by the IP address.
Eg:\\192.168.1.121 and press Enter key to continue.
Type "Guest" as username. Leave password empty. Click on OK.
This will direct you to the Public folder on the NAS drive.
ADDONICS TECHNOLOGIES
Model: NAS2XU2
To list the NAS drive in Network Places
Go to Network Places in Windows XP, under Network Tasks, click on the
"Set up a home or small office network". Follow the wizard and once
completed, reboot your system.
For Vista and Windows 7, enable file sharing when accessing the NAS
over the network.
To access Samba PUBLIC folder of NAS2XU2 in Ubuntu 8.04
First, using the console get the prerequisites for the samba file system:
$ sudo aptitude install samba smbfs
$ mkdir /mnt/NAS
$ sudo mount.cifs //NAS__IP_address/Public /mnt/NAS -o
username=Guest
To access Samba PUBLIC folder of NAS2XU2 in Mac OS X
1.
2.
3.
4.
5.
TECHNICAL SUPPORT
Phone:
Hours:
Email:
Now you have set up the folder that you wish to share on your NAS .
This folder can be access from other computer on your local
network.
Start at the "Go" drop down menu at the top of your screen, then
click "Connect to server".
Type into the "Server Address" field 'smb://' followed by the IP
address of the NAS2XU2 you want to connect.
Click the "Connect" button in the bottom right corner of the window.
Enter in a username and password. Click the "OK" button in the
bottom right hand corner of the window to finish
Note: The workgroup name needs to be the workgroup the PC
belongs to. If you don't know the workgroup that the PC belongs to
you can find out by right clicking on the "My Computer" desktop icon
on the PC, selecting "Properties" and then selecting the "Computer
Name" tab. The workgroup name is about half way down the
window.
Select the "share" you are after. This simply refers to a particular
group of shared files. Click "OK".
408-453-6212
8:30 am - 6:00 pm PST
http://www.addonics.com/support/query/
Advertisement
