Advertisement
Table of Contents
T E C H N O L O G I E S
IDE Connector
Installation Guide
1.
System must be turned OFF. Connect the Embedded IDE-CF adapter to
the 40-pin IDE connector on the motherboard.
2.
Connect the 2-Pin power connector side of the Y-type power cable to this
adapter and the other end to the PC power supply.
3.
Insert a CF card or Micro Drive before the turning the system ON.
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
User Guide
Embedded IDE-CF Adapter
(ADEBIDECF)
CF Slot
Drive Activity LED
2-Pin Power Connector
Master or Slave Jumper Setting
Default: Master with Jumper pin
Motherboard
v4.1.11
Advertisement
Table of Contents
Need help?
Do you have a question about the ADEBIDECF and is the answer not in the manual?
Questions and answers