Kohler COMPOSED K-20257T-B-CP Installation Instructions Manual page 6

注意：
三 安装直流电源盒
1.
(21)
4节5
注意：
2.
四 如何安装排水组件
(22）
(23)
(22)
(23)
(24)
(24)
注意：
(25)
25mm 55mm
6 6
(20)
Apply plumbers putty
(26)
16
15
17
18
混水(Mixer)
19
单冷(Cold)
20
21
22
23
Note:
Ensure cylinder install on water inlet.
Install DC Power Unit
1. Take battery box out, loosen screws
(20), insert 4 AA batteries per +/-
pole indication ( 21) on battery
box cover. Fasten battery box
cover with screws.
Note: no reversed battery
polarity. Do not mix new and used
batteries together.
2. Connect power cords with
corresponding color wires, then place
battery box assembly to empty space
within control assembly then fasten
control box by screws based on
installation direction. For AC faucet,
except corresponding cords connect to
AC/DC transformer output, other
installation methods are identical.
4
How to Install the Drain
Unscrew the drain flange ( 22) from
drain assembly. Apply plumbers
putty around the bottom circle. Insert
drain body (23) into lavatory from the
underside.
Screw the drain flange ( 22) into drain
body (23). Tighten the locknut (24)
manually from the underside.
Note: Remove excessive putty. Note:
after tightening locknut (24), do not
adjust drain body position, otherwise
putty seal might be damaged.
Connect the tailpiece( 25) to the
trap(26). The tailpiece should ex tend
25mm to 55mm into the trap.
1359742-T01-A