Schaeffler ProLink CMS User Manual page 33

Detailed instructions for configuring the ProLink device and for analysing the measurement data can be found in the
user documentation for Schaeffler SmartWeb and Schaeffler SmartUtility Light or Schaeffler SmartUtility.
Identification and positioning of the modules
The Schaeffler SmartWeb software has a function for visual module identification. Use this
function to determine which physical module belongs to a module displayed in the software.
To do this, proceed as follows:
Select the module in the Schaeffler SmartWeb software and click the alarm status symbol
·
The LEDs on the associated physical module flash alternately. When you turn off the
module identification, the LEDs on the physical module exit flashing mode.
The module display in the software is sorted alphabetically. You can therefore change the
·
position of the module in the software by changing its name.
Information and services for the ProLink condition monitoring system
We offer a unique range of services for the ProLink system – from training courses, technical mentoring during the
induction phase and expert support with diagnostic issues, right through to customised service agreements including
remote monitoring and reporting.
A look at the extensive range of products and services relating to the ProLink system can be found online at
www.schaeffler.de/en/condition-monitoring/prolink.
to enable visual module identification.
Further information
33