Remote Management - TP-Link TL-MR6400 User Manual

Chapter 13

13. 6. Remote Management

By default, the remote devices are not allowed to manage the router from the internet.
Follow the steps below to allow remote devices to manage the router.
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to Advanced
Management section.
3. Enable Remote Management
or enable Remote Management
if you only want to allow Remote Management via HTTP.
4. Keep the Port as the default setting.
5. If you only want to allow one specific device to manage the router, select
Following IP/MAC Address
want to allow all remote devices can access the router, select All.
6. Click Save to make the settings effective.
Tips:
1. You can find the WAN IP address of the router on
2. The router's WAN IP should be a public IP address. For the WAN IP is usually a dynamic IP, you can refer to
Dynamic DNS Service Account
> System Tools> Administration
if you want to allow Remote Management via HTTPS,
and then disable Remote Management via HTTPS
and then enter the
Basic >
if you want to log in to the router through a domain name.
Administrate Your Network
page. Locate the
IP Address or
Network Map > Internet.
Remote
Only the
MAC Address. If you
Set Up a
81