TP-Link TL-MR6400 User Manual page 91

Chapter 13
• Enable CWMP - Toggle On to enable the CWMP (CPE WAN Management Protocol)
feature.
• Inform - Enable this feature to send an Inform message to the ACS (Auto Configuration
Server) periodically.
• Inform Interval - Enter the time in seconds when the Inform message will be sent to
the ACS.
• ACS URL - Enter the web address of the ACS which is provided by your ISP.
• ACS Username/Password
• Interface used by TR-069 client
client.
• Display SOAP messages on serial console
• Connection Request Authentication
for the connection request.
• Username/Password
the router.
• Path - Enter the path for the ACS server to log in to the router.
• Port - Enter the port that connects to the ACS server.
• URL - Enter the URL that connects to the ACS server.
• Get RPC Methods
3. Click Save to make the settings effective.
- Enter the username/password to log in to the ACS server.
- Select which interface to be used by the TR-069
- Select this checkbox to enable authentication
- Enter the username/password for the ACS server to log in to
- Click to get the methods to support CWMP.
Administrate Your Network
- Toggle to enable or disable this feature.
87