Open Ports Dynamically By Port Triggering - TP-Link TL-MR6400 User Manual

Chapter 11
4. Click View Existing
protocol will be auto-populated. Enter the PC's IP address 192.168.1.100 in the
Internal IP field.
5. Click Save to save the settings.
Note:
1. It is recommended to keep the default settings of
which port and protocol to use.
2. If the service you want to use is not in the
manually. You should verify the port number that the service needs.
3. You can add multiple virtual server rules if you want to provide several services in a router. Please note
that the External Port
Done!
Users in the internet can enter
218.18.232.154) to visit your personal website.
Note:
1. WAN IP should be a public IP address. For the WAN IP is assigned dynamically by ISP, it is recommended
to apply and register a domain name for the WAN by DDNS, go to
for more information. Then you can use
2. If you have changed the default
domain name: External Port

11. 3. Open Ports Dynamically by Port Triggering

Port triggering can specify a triggering port and its corresponding external ports.
When a host in the local network initiates a connection to the triggering port, all the
external ports will be opened for subsequent connections. The router can record the
IP address of the host. When the data from the internet return to the external ports, the
Services, and choose HTTP. The external port, internal port and
Service
cannot be overlapped.
http:// WAN IP
http://domain name
External Port, you should use
to visit the website.
Internal Port and Protocol
Type, you can enter the corresponding parameters
(in this example, enter http://
Set Up a Dynamic DNS Service Account
to visit the website.
http://WAN IP: External Port
NAT Forwarding
if you are not clear about
or http://
48