Key To Symbols Symbols - Jonsered HT2218 Operator's Manual

Symbols
WARNING! Incorrect or careless use of a
hedge trimmer can turn it into a
dangerous tool that can cause serious or
even fatal injury. It is extremely important
that you read and understand the contents of this
operator's manual.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
• Approved hearing protection
• Approved eye protection
This product is in accordance with
applicable EC directives.
Always wear approved protective
gloves.
Wear sturdy, non-slip boots or shoes.
Ignition; choke: Set the choke control
in the choke position.
Air purge.
Noise emission to the environment
according to the European
Community's Directive. The machine's
emission is specified in chapter
Technical data and on label.
Starting instructions
See the instructions
under the heading Start
and stop.
182 – English
KEY TO SYMBOLS
Locking lever, handle
adjustment
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
The engine is switched off by moving the
stop switch to the stop position.
CAUTION! The stop switch
automatically returns to the start
position. In order to prevent unintentional starting, the
spark plug cap must be removed from the spark plug
when assembling, checking and/or performing
maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
worn.