Ignition 2bright Profile 3K 26 degrees User Manual page 33

Gamma correction
Display reversion
In this menu, you can set the Gamma correction.
Press [MENU]. Press [UP] or [DOWN] repeatedly until the display shows 'Settings' and confirm
with [ENTER]. Use [UP] or [DOWN] to select the menu item 'Gamma correction' and confirm
with [ENTER]. Use [UP] or [DOWN] to select an option between 'NO' , '2' , '2,2' , '2,4' , '2,6' and
'2,8' .
Confirm the selection with [ENTER]. With [MENU], you return to the parent menu.
To return to the parent menu without changes press [MENU] without prior confirmation.
In this menu, you can specify whether the display should be shown normally or rotated by
180°.
Press [MENU]. Press [UP] or [DOWN] repeatedly until the display shows 'Settings' and confirm
with [ENTER]. Use [UP] or [DOWN] to select the menu item 'Display Reverse' and confirm with
[ENTER]. Use [UP] or [DOWN] to select the 'On' option if the display should be shown rotated
by 180°, or select the 'Off' option if you want the display to appear normally.
Confirm the selection with [ENTER]. With [MENU], you return to the parent menu.
To return to the parent menu without changes press [MENU] without prior confirmation.
Operating
2bright Profile 3K 26°
33
LED spotlight