Ignition 2bright Profile 3K 26 degrees User Manual page 32

Operating
Strobe effect
LED repetition rate
2bright Profile 3K 26°
32
LED spotlight
In this menu, you can set the Strobe effect frequency.
Press [MENU]. Press [UP] or [DOWN] repeatedly until the display shows 'Stand Alone' and con‐
firm with [ENTER]. Use [UP] or [DOWN] to select the menu item 'Strobe' and confirm with
[ENTER]. Use [UP] or [DOWN] to specify the strobe effect frequency in a range from '0' ... '255' .
Confirm the selection with [ENTER]. With [MENU], you return to the parent menu.
To return to the parent menu without changes press [MENU] without prior confirmation.
In this menu, you can set the LED repetition rate.
Press [MENU]. Press [UP] or [DOWN] repeatedly until the display shows 'Settings' and confirm
with [ENTER]. Use [UP] or [DOWN] to select the menu item 'Frequency' and confirm with
[ENTER]. Use [UP] or [DOWN] to select a LED repetition frequency between '3K' , '6K' , '12K' and
'24K' .
Confirm the selection with [ENTER]. With [MENU], you return to the parent menu.
To return to the parent menu without changes press [MENU] without prior confirmation.