Ignition 2bright Profile 3K 26 degrees User Manual page 31

Dimmer setting
Dimmer fine adjustment
In this menu, you can adjust the LED brightness.
Press [MENU]. Press [UP] or [DOWN] repeatedly until the display shows 'Stand Alone' and con‐
firm with [ENTER]. Use [UP] or [DOWN] to select the menu item 'Static' and then the menu item
'Dimmer' and confirm with [ENTER]. Use [UP] or [DOWN] to specify a value between '0' (LED
off) and '255' (full brightness).
This setting is only relevant if the device is not controlled via DMX. When the display shows the
desired value press [ENTER] to confirm the selection and then [MENU] to return to the parent
menu. To return to the parent menu without changes press [MENU] without prior confirma‐
tion.
In this menu, you can fine-adjust the LED brightness.
Press [MENU]. Press [UP] or [DOWN] repeatedly until the display shows 'Stand Alone' and con‐
firm with [ENTER]. Use [UP] or [DOWN] to select the menu item 'Dimmer Fine' and confirm with
[ENTER]. Use [UP] or [DOWN] to specify a value between '0' (LED off) and '255' (full brightness).
This setting is only relevant if the device is not controlled via DMX. When the display shows the
desired value press [ENTER] to confirm the selection and then [MENU] to return to the parent
menu. To return to the parent menu without changes press [MENU] without prior confirma‐
tion.
Operating
2bright Profile 3K 26°
31
LED spotlight