Ignition 2bright Profile 3K 26 degrees User Manual page 30

Operating
DMX mode
Operating mode Slave
2bright Profile 3K 26°
30
LED spotlight
Press [MENU]. Press [UP] or [DOWN] until the display shows 'DMX Mode' and confirm the selec‐
tion with [ENTER]. Use [UP] or [DOWN] to select one of the three DMX modes (1-channel mode,
2-channel mode or 4-channel mode, display shows '1CH' , '2CH' or '4CH' ). The device is now
controlled by a DMX controller.
When the display shows the desired value confirm the setting with [SET]. To exit the menu
item without making changes, press [ESC].
In this menu, you can specify whether the device is operating in slave mode.
Press [MENU]. Press [UP] or [DOWN] repeatedly until the display shows 'Slave' and confirm with
[ENTER]. Use [UP] or [DOWN] to select 'Yes' to use the device as a slave, choose 'No' to deacti‐
vate the slave mode.
Confirm the selection with [ENTER]. With [MENU], you return to the parent menu.
To return to the parent menu without changes press [MENU] without prior confirmation.