Battery Test; Signals - Simons Voss Technologies PIN code keypad MobileKey Quick Manual

MK/SI PinCode-Tastatur (on-
line)
8. Replace the front of the housing.
9. Screw the two screws back in the bottom of the housing com-
9

8.1 Battery test

Perform a battery test every time that you replace the batteries. This
way, you ensure that the batteries used are fully functional.

9

9 Signals

Information on signaling the SmartIntego variant can also be found in
the SmartIntego TechGuide.
EN
pletely.
The batteries have been replaced.
Enter 000 000 1.
PIN code keypad signals the battery level (see
9. Signals
}
Signals [ 41]
).
41 / 164