Determining The Pin Length; Set To Storage Mode - Simons Voss Technologies PIN code keypad MobileKey Quick Manual

MK/SI PinCode-Tastatur (on-
line)

4.2 Determining the PIN length

The User PIN may be between 1 and 9 digits long; 8 digits is the
standard configuration.
NOTE
The selected user PIN length and the selected PIN length in the config-
uration interface must be the same length!
1. Set the same length for the user PIN on the PinCode keyboard and
2. For security reasons, choose a length of at least four digits.
1. Enter 0.
2. Enter the Master PIN.
3. Enter the length of the User PIN – e.g. 4 for a 4-digit User PIN.
9
9

4.3 Set to storage mode

NOTE
If the PIN code keypad is to be used in a different system, the PIN code
keypad not only needs to be deleted in the configuration view, but also
set to storage mode.
EN
in the configuration interface.
PIN code keypad beeps and flashes green briefly twice.
9
PIN code keypad beeps and flashes green briefly twice.
The User PIN length has been successfully changed.
4. Configuration
35 / 164