Simons Voss Technologies PIN code keypad MobileKey Quick Manual page 40

8. Battery replacement
IMPORTANT
The spring tension of the clamps causes the clamps to jump out.
The clamps are under tension. They can jump out and get lost when
you release them.
4. Remove the battery.
5. Remove all other batteries in the same way.
NOTE
All batteries are discharged at approximately the same rate. Therefore,
replace all batteries at the same time.
6. Insert the new batteries with the positive pole facing upward
7. Carefully hook the battery clips back into the circuit board.
40 / 164
(Murata, Panasonic or Varta CR2032 (3V) batteries).
MK/SI PinCode-Tastatur (on-
line)
EN