Battery Replacement - Simons Voss Technologies PIN code keypad MobileKey Quick Manual

MK/SI PinCode-Tastatur (on-
line)
4. The networked lock is activated via the SmartBridge if it matches

8 Battery replacement

To change the batteries, you must open the housing of the PIN code
keypad. For this you need a Torx screwdriver size 6 (not included in
delivery)!
IMPORTANT
Damage to the electronics due to fluids or static discharge
Do not touch electronics/components; do not allow them to come into
contact with oil, paint, moisture, alkali or acids.
NOTE
Do not touch the contacts on the new batteries with your hands when
replacing the old ones. Use cotton gloves free of fat or grease.
1. Unscrew the two screws in the bottom of the housing completely.
2. Remove the front of the housing.
3. Using a screwdriver, slide one side of the battery brackets into the
EN
the User PINs specified in the web app (SmartIntego may differ).
designated opening.
8. Battery replacement
39 / 164