Usb Connection - PNI Hunting 2C 8MP User Manual

Note: Don't cut off power supply during software upgrade; otherwise, camera will
not be able to be turned on again unless software upgrade via PC.

USB Connection

When camera is connected via USB, press and hold button
emits one Beep Sound, and red indicator LED lights up; then interface below appears.
Press to choose DC in, or PC connection; press
c. DC in for Power Supply
Camera enters Test Mode Main Interface.
d. PC Connection to Read MicroSD Card
Camera screen shows interface as below. Now you can read MicroSD Card
contents via PC.
By pressing
to Exit.
Plug out power cable to turn off camera and restart.
again, camera will be turned into a PC camera; press
to confirm choosing.
- 11 -
, camera speaker
again