Software Upgrade - PNI Hunting 2C 8MP User Manual

Time/Date
Camera Password
Reset

Software Upgrade

11. Copy the upgrade software files (3 files) into MicroSD Card;
Note: Suggest to use 1 or 2 GB SD card to do the upgrade.
12. Insert MicroSD Card into camera;
13. Insert batteries/ or plug in USB power cable;
14. Press and hold Power/Navigation button
Sound;
15. Release button
16. Then press and hold Menu/OK button
Note: red indicator LED stops flashing but keeps lighting up;
17. Release button
18. Upgrade succeeds when red indicator led is off;
19. Plug out batteries/or power cable;
20. Insert batteries/ or power cable; turn on camera. Done.
c. Set up
4) Press to enter configuration page;
5) Press to choose, press
number and move to next number;
6) Press again to Exit after all numbers are selected.
d. How does this work?
Date/Time; Date: "month/ date/ year"; Time: "hour/minute"
Note: Plz adjust Time/Date when you turn on camera to
ensure camera to function well as expected.
c. Set up
4) Press to enter configuration page, press
choose ON; press
5) Press
confirm and move to next number;
6) Press again to confirm.
d. How does this work?
Enable password protection for your camera; support totally 6
digits long password access.
c. Set up
Press to enter configuration page, press
YES/NO; press
d. How does this work?
Choose YES to reset camera settings back to factory default
settings.
when you see red indicator led flashes;
after you see until ISP interface shows up in screen
- 10 -
again to set Password;
to choose wanted digit, press
to confirm setting.
, camera speaker emits one Beep
;
to confirm wanted
to
to
to choose