Camera Operation Flow Chart; Functions Setup - PNI Hunting 2C 8MP User Manual

Camera Operation Flow Chart

ON/OFF Camera
(PIR Auto, TEST, OFF)
Functions
Setup
Enter PIR Auto Working
Mode from Test Mode
Manual Recording
Note:
4) To ensure camera functions well; plz adjust camera to be with correct time;
5) Plz don't turn on Time Lapse
6) Camera can be turned off by pressing and holding button
PIR Auto
Working Mode
TEST Mode
Power Off
Configuration
Return to First
Navigation Menu
In First Navigation Menu, press and hold button
for 3 seconds to enter PIR Auto Working Mode;
4. Set Camera, or Video, or Camera + Video
First Navigation Menu
, press Menu / OK button
, press Menu / OK button
, press Menu/OK button
5. After configuration above, press and hold button
seconds to return back to TEST Mode main interface; then press
Power/Navigation button
video/ photo + video;
6. Press Power/Navigation button
recording;
and Delay
- 4 -
Press and hold Power / Navigation button
3 sec; camera will enter PIR Auto Working mode
after indicator flashes 5 times;
In PIR Auto Working Mode, press Menu / OK
button once to wake up camera LCD screen
to enter TEST Mode;
Press and hold Power / Navigation button
for 5 seconds to turn off camera.
In TEST Mode, press Menu/OK button
enter settings menu; now button
for navigation; button
save/confirm needed setup;
Press and hold button
return back to First Navigation Menu after all
settings are done
; camera is in camera mode;
; camera is in video mode;
; camera is in Cam+Video mode
; camera now is recording photo/
at the same time;
any time.
for
to
is always
is always for OK to
for 3 seconds to
for 3
again to stop video