Quick Start - PNI Hunting 2C 8MP User Manual

9. Open back cover to insert MicroSD Card and batteries;
Power On Camera
10. Press and hold Power/Navigation button
mode after indicator flashes 5 times;
11. Press Menu/OK button
Manual Photographing/ Video Recording
12. Test Mode Main Interface, press Power/Navigation button
videos, or photo + video based on camera settings; stop video recording by pressing again
Power/Navigation button
Enter Menu for Setup Functions
13. Test Mode Main Interface, press Menu/OK button
button is always for navigation; button
setup;
14. Press and hold button
Modes Menu) after all settings are done;
15. Test Mode Main Interface, press and hold button
Working Mode; (indicator LED will flash 5 times, Screen will be off.)
Power Off Camera
16. Press and hold button

9. Quick Start

for 3 sec; camera will enter PIR Auto Working
once to wake up camera LCD screen to enter TEST Mode;
for 3 seconds to return Test Mode Main Interface (Camera
for 5 seconds to turn off camera.
- 3 -
again to shoot photos,
to enter settings menu; now
is always for OK to save/confirm needed
for 3 seconds to enter PIR Auto