Table of Contents
Advertisement
NCA-4220 User Manual
2. For the rear rack installation, slide
the rail to aim and engage the
bolts on the rail's rear end with
the 2 available holes on the post,
and the rail assembly will click
into place.
3. Repeat Step 1~2 to install the
other rail onto the post.
Installing the Chassis onto the Rack
1. Stretch both of the inner channels
out to their fullest extent. You will
hear a click sound when they are
fully stretched and locked.
2. Hold the chassis with its front
facing you, lift and gently insert it
by aligning with the slide-rail
assemblies as shown in the image,
and then push the unit into the
cabinet.
3. Keep sliding the rails in until they
stop about halfway. Press down
the metal clips on both inner
channels and push them further
into the cabinet.
Rear Post
Clic
The inner channel will
click when it is fully
stretched.
Press down the metal
clips while pushing in.
34
Clic
Clic
Advertisement
Table of Contents
