Download Print this page

Craftsman 19B30005791 Installation Manual

Mulch kit 46” deck
Hide thumbs

Advertisement

Quick Links

MULCH KIT 46" DECK
Model No. 19B30005791
Model 19B30005791 mulch kit is designed for use with select 46-inch two-blade
cutting decks. Refer to your tractor's Operator's Manual to assure compatibility.
Carton Contents
Before beginning installation, remove all parts from the carton to make sure
everything is present. Carton contents are listed below and shown in Figure 1. Part
numbers are shown in parentheses.
Two Mulching Blades (742-04268)
One Deck Mulch Plug Assembly (631-05195A)
One Wing Knob (720-04122)
Figure 1
Blade Installation
Before beginning installation, place the tractor on a firm and level surface, set the
parking brake, place the PTO in the disengaged (OFF) position, stop the tractor's
motor and remove the ignition key to prevent unintended starting.
Cutting blades are sharp. Always protect hands by wearing heavy leather work
gloves to grasp blades.
Remove the cutting deck from beneath the tractor as instructed in your tractor's
Operator's Manual.
1.
Gently flip the deck over to expose its underside.
2.
Stablize one of the cutting blades with a blade lock tool or a block of wood.
See Figure 2.
INSTALLATION MANUAL
WARNING
WARNING
Figure 2
Form No. 769-18450
(November 8, 2018)

Advertisement

loading

  Related Manuals for Craftsman 19B30005791

  Summary of Contents for Craftsman 19B30005791

  • Page 1 MULCH KIT 46” DECK INSTALLATION MANUAL Model No. 19B30005791 Model 19B30005791 mulch kit is designed for use with select 46-inch two-blade Blade Installation cutting decks. Refer to your tractor’s Operator’s Manual to assure compatibility. Carton Contents WARNING Before beginning installation, place the tractor on a firm and level surface, set the Before beginning installation, remove all parts from the carton to make sure parking brake, place the PTO in the disengaged (OFF) position, stop the tractor’s...
  • Page 2 See Figure 3. Figure 4 IF YOU HAVE QUESTIONS OR COMMENTS, CONTACT US. CRAFTSMAN® is a registered trademark of Stanley Black & Decker, Inc., used under license. © 2018 CRAFTSMAN U.S. & Canada Only CRAFTSMAN.com 1-888-331-4569 WWW.CRAFTSMAN.COM...
  • Page 3: Manual De Instalación

    KIT DE ABONO, PLATAFORMA DE 46” MANUAL DE INSTALACIÓN Modelo N.º 19B30005791 El kit de abono del modelo 19B30005791 está diseñado para ser utilizado con Instalación de la cuchilla plataformas de corte de dos cuchillas seleccionadas de 46 pulgadas. Consulte el manual del operador del tractor para asegurar la compatibilidad.
  • Page 4 Figura 3. Figura 4 Figura 3 SI TIENE DUDAS O COMENTARIOS, CONTÁCTENOS. CRAFTSMAN® es una marca registrada de Stanley Black & Decker, Inc., utilizada bajo licencia. © 2018 CRAFTSMAN, se aplica solo en EE. UU. y Canadá CRAFTSMAN.com 1-888-331-4569 WWW.CRAFTSMAN.COM PRECAUCIÓN...
  • Page 5: Manuel D'installation

    DÉCHIQUETAGE 46 po (1,17 m) Numéro de modèle 19B30005791 Installation de la lame L'ensemble de déchiquetage, modèle 19B30005791, est conçu pour être utilisé avec certains plateaux de coupe à deux lames de 46 po (1,17 m). Reportez-vous au manuel AVERTISSEMENT de l'utilisateur du tracteur pour vous assurer de la compatibilité.
  • Page 6 Figure 4 Figure 3 COMMUNIQUEZ AVEC NOUS POUR TOUTE QUESTION OU CRAFTSMAN® est une marque de commerce enregistrée de Stanley Black & Decker, Inc., elle est utilisée en vertu d'une licence. TOUT COMMENTAIRE. © 2018 CRAFTSMAN É.-U. et Canada uniquement CRAFTSMAN.com...
  • Page 7 otes...
  • Page 8 CRAFTSMAN® is a registered trademark of Stanley Black & Decker, Inc., used under license. CRAFTSMAN® es una marca registrada de Stanley Black & Decker, Inc., utilizada bajo licencia. © 2018 CRAFTSMAN U.S. & Canada Only CRAFTSMAN.com Product Manufactured by (Producto fabricado por): MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019...