Table of Contents
Advertisement
6. MAINTENANCE
NOTE – Turn off power to sensor bar before performing any maintenance.
Do not disconnect sensor bar if charged materials are present.
Cleaning
Clean the sensor bar using a lint-free wiper moistened (but not saturated) with
isopropyl alcohol. Use caution around the sensor modules and avoid contact with
the sensor aperture. Allow the sensor bar to dry completely before applying power.
Calibration
Sensor modules should be calibrated to ensure accurate measurement. Calibration
is performed at the factory or authorized service center. Recommended calibration
interval is one year.
IQ Easy Sensor Bar
18
5201226 Rev. F
Advertisement
Table of Contents
Need help?
Do you have a question about the Simco-Ion IQ Easy Sensor Bar and is the answer not in the manual?