Table of Contents
Advertisement
Data Logging: Available, must be turned on.
Firmware Version Main: The firmware revision in the gateway (main) circuit board.
Web Voltage Sensor 1,2,3...: The voltage level reported by a given sensor module.
Firmware Version Sensor 1,2,3...: The firmware revision in the sensor module circuit
board.
The IQ Easy Sensor Bar can be used as part of a closed-loop feedback system to
control an IQ Easy or IQ Power Static Bar or Fantom Blower. In this configuration
the ion output from the static bar or blower is optimized to provide the best possible
web neutralization. Enabling the CLFB Mode (closed-loop feedback) is performed
on the IQ Power Control Station under the neutralizer device pages.
NOTE – CLFB with a neutralizer is not possible when the sensor bar is
configured in the charging mode. Ensure Sensor Mode is set to "Neutralizing"
for CLFB applications.
IQ Easy Sensor Bar
16
5201226 Rev. F
Advertisement
Table of Contents
Need help?
Do you have a question about the Simco-Ion IQ Easy Sensor Bar and is the answer not in the manual?
Questions and answers