Installing Drivers (For Mellanox® Connectx®-6 Vpi) - Supermicro AOC-MIBE6-m1C User Manual

Super AOC-MIBE6-m1C(M) Add-on Card User's Guide
3-5 Installing Drivers (for Mellanox® ConnectX®-6 VPI)
Follow the procedures below to install drivers for Linux.
Linux Drivers
Use the following procedures to install drivers on the Linux operating system.
Installing InfiniBand Drivers for the Linux Operating System
1. Download the driver from the Supermicro CDR-NIC LAN driver CD, the Mella-
nox® Support website that contains the latest driver, or go to the Supermicro
site at https://www.supermicro.com/wftp/Networking_Drivers/Mellanox/. Go to
the following directory: Mellanox > Linux.
2. Choose the desired InfiniBand Linux driver package file.
3. Install the driver by entering the following commands:
tar xzvf MLNX_OFED_LINUX-<ver>.tgz
cd MLNX_OFED_LINUX–<ver>
./mlnxofedinstall --without-fw-update
This installs the Linux driver to your system. For more driver installation informa-
tion, please refer to the Mellanox® Support website.
Windows Drivers
Use the following procedures to install drivers on the Windows operating system.
Installing InfiniBand Drivers for the Windows Operating System
1. Download the driver from the Supermicro CDR-NIC LAN driver CD, the Mella-
nox® Support website that contains the latest driver, or go to the Supermicro
site at https://www.supermicro.com/wftp/Networking_Drivers/Mellanox/. Go to
the following directory: Mellanox > Windows.
2. Choose the desired InfiniBand Windows driver package file.
3. Double-click to run and install the driver package file.
3-6