Installing Drivers (For Broadcom ® Bcm57508); Before Installing The Drivers For The Linux Operating System Only; Installing 100G Drivers For The Linux Operating System - Supermicro AOC-S100G-b2C User Manual

3-4 Installing Drivers (for Broadcom
To install drivers for the AOC-S100G-b2C add-on card for either Linux and Windows,
please follow the instructions below.
Before Installing the Drivers for the Linux Operating System
Only
Infiniband-diags is a set of utilities designed to help configure, debug, and maintain
infiniband fabrics. Installing them from the Linux library is necessary prior to driver
installation. To to do so, please first download the following libraries:
yum -y install libibverbs* infiniband-diags perftest qperf
librdmacm-utils
yum -y groupinstall "InfiniBand Support"

Installing 100G Drivers for the Linux Operating System

Follow the steps below to install the drivers on the Linux operating system:
1. Download the Linux driver package file: netxtreme-bnxt_en-<ver>.tar.gz.
Note: This driver can be found on either the Supermicro website or by
going to the Linux_Driver directory from the FTP site
com/Networking_Drivers) or CDR-NIC LAN driver CD in the following
directory: Broadcom > 100G > Linux > Linux_Driver.
BCM57508)
®
3-3
Chapter 3: Installation
(ftp://ftp.supermicro.