Supermicro AOC-MIBE6-m1C User Manual page 19

Super AOC-MIBE6-m1C(M) Add-on Card User's Guide
Follow the steps below to install the add-on card into your system that supports a
swappable bracket. The add-on card must be installed in the swappable bracket
before it can be installed in your system
1. Install the add-on card into the swappable bracket.
2. Position the add-on card in front of the SIOM slot and gently push in both
sides of the card until it slides into the slot.
3. Once the card is in the slot, push both knobs in and turn to the right to lock
the card in the system. The left knob has the unlock/lock symbols next to it.
To ensure that the add-on is locked, make sure that the knob position indica-
tor is pointing to the lock symbol.
3-4