Jumpers And Major Components - Supermicro AOC-MIBE6-m1C User Manual

2-2

Jumpers and Major Components

The table below contains jumpers on the AOC-MIBE6-m1C(M):
Jumper
JP2
JP11
J11
The following major components are installed on the AOC-MIBE6-m1C(M):
1. Super I/O Module (SIOM) form factor
2. Mellanox® ConnectX-6 controller
3. Up to 100Gbps InfiniBand EDR or 100Gbps Ethernet
4. NC-SI for remote management
5. Asset management features with thermal sensor
6. PCIe Gen4 and PCIe Gen3 support
7. RoHS compatible
Description
Standby Mode Support
I2C Address Mode
I2C Header (for debug purpose)
2-3
Chapter 2: Hardware Components
Pins
1-2: Disable (default)
2-3: Enable
1-2: ARP mode (default)
3-4: Fixed 0x30
Pin 1: I2C_SDA
Pin 2:I2C_SCL
Pin 3: Ground