Table of Contents
Advertisement
Cleaning and Maintenance
6
Cleaning and Maintenance
6.1
Safety Instructions for Cleaning
•
Before cleaning, disconnect the appliance from the power supply.
•
Leave the appliance to cool down completely.
•
Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
•
Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
•
For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
•
Do not clean the appliance with steam washer.
•
Do not use a jet of compressed air on areas covered with flour and in general on
the appliance.
•
Do not use cleaning agents containing chlorine (also diluted) or featuring its, like
bleaching lyes, hydrochloric acids, pipe unclogging agents, cleaning agents for
marble, general descaling agents, etc., which may impact steel properties and
cause permanent stains or oxidation. Even small spills of listed agents may
cause oxidation and damage steel in some cases.
•
Do not use agents for cleaning silver.
6.2
Cleaning
DANGER!
Electric shock hazard!
Never put nor place the appliance directly in a sink or under a water tap.
Make sure that no water gets into the device.
130115
EN
17 / 22
Advertisement
Table of Contents
