Table of Contents
Advertisement
Installation and operation
5.2
Assembly and Disassembly
WARNING!
Injury hazard!
All interventions for the purpose of assembly and disassembly of any part
of the appliance may be executed only with the motor switched off and the
mains plug disconnected.
The assembly of the appliance is executed in a number of steps:
1. Put the interlocking ring (6) of the mixing rod (8) onto a quick coupling (2) of the
appliance body (3).
2. Tighten the mixing rod (8) by rotating it in the counter-clockwise direction, until it
snaps onto the appliance body (3).
NOTE!
Follow the instructions found on the appliance body.
The disassembly shall be performed according to the above mentioned description,
but in the reverse order.
130115
EN
Fig. 2
13 / 22
Advertisement
Table of Contents
