Table of Contents
Advertisement
6. Introduce the mixing rod into a pot.
7. Start the appliance by pressing the ON/OFF button; keep it pressed until the end
of food products processing.
8. As soon as the processed food products reach the required quality, release the
ON/OFF button.
9. When the ON/OFF button is released, wait at least 10 seconds and put the
appliance on the suitable working surface.
10. If needed, put the processed food products into a suitable container.
Switching the Appliance Off
When you switch the appliance off, perform the following steps:
– before switching off, make sure that the processing is finished or the
product yielded the required amount,
– stop the appliance by releasing the ON/OFF button,
– wait approx. 10 seconds, until the motor stops completely,
– remove the appliance and put it onto a suitable surface,
– remove the plug from the socket.
EN
Then you may clean the appliance and accessories observing instructions in
section 6.2 'Cleaning'.
Protective Elements / Protective Thermoswitch
If the appliance is used extensively, subject to too long periods of operation or
overloaded, the protective thermoswitch automatically disconnects the appliance.
In such a case, before switching the appliance again, wait until the appliance cools
down completely.
16 / 22
Installation and operation
130115
Advertisement
Table of Contents
