Displaying The Electronic Label Data For The Device; Displaying The Cpu Usage Of The Device - H3C WX5540E Installation Manual

Field
Status
Max Ports

Displaying the electronic label data for the device

An electronic label is a profile of a device. It contains the permanent configuration, including the serial
number, manufacturing date, MAC address, and vendor name.
Use the display device manuinfo command to display the electronic label data for the device.
<H3C> display device manuinfo
Slot 2 CPU 0:
DEVICE_NAME
DEVICE_SERIAL_NUMBER
MAC_ADDRESS
MANUFACTURING_DATE
VENDOR_NAME
Table 6 Command output
Field
DEVICE_NAME
DEVICE_SERIAL_NUMBER
MAC_ADDRESS
MANUFACTURING_DATE
VENDOR_NAME

Displaying the CPU usage of the device

Use the display cpu-usage command to display the CPU usage statistics for the device.
<H3C>display cpu-usage
Unit CPU usage:
1% in last 5 seconds
1% in last 1 minute
2% in last 5 minutes
Table 7 Command output
Field
Unit CPU usage
1% in last 5 seconds
Description
Device status:
•
Fault—The controller engine in the slot has failed and cannot boot correctly.
•
Normal—The controller engine in the slot is operating correctly.
Maximum number of ports supported.
: WX5540E
: 210235A0VS1234567890
: 000f-e212-6103
: 2013-04-16
: H3C
Description
Device model.
Serial number of the device.
MAC address of the device.
Manufacturing data of the device.
Vendor name.
Description
CPU usage.
Average CPU usage in the last 5 seconds (after the device boots, the device
calculates and records the average CPU usage at the interval of 5 seconds).
34