Power Module Leds - H3C WX5540E Installation Manual

LED
Expansion slot status
LED (green/yellow)
100/1000 Base-T
out-of-band
management Ethernet
port status LED (green)
100/1000 Base-T
autosensing Ethernet
port status LED
100Base-FX/1000Ba
se-X SFP port status
LED
10GBase-R SFP+ port
status LED

Power module LEDs

Figure 41 AC power module LEDs
(1) AC power input status LED
Mark Status
Steady green
Flashing green
MOD
Steady yellow
Off
Off
LINK/
Steady green
ACT
Flashing green
Steady yellow
Flashing yellow
Steady green
N/A
Flashing green
Off
Steady yellow
Flashing yellow
Steady green
N/A
Flashing green
Off
Steady green
N/A Flashing green
Off
47
Description
An interface card is present.
The hard disk is reading or writing data.
A failure has occurred.
No interface card is present.
No link is present.
A link is present.
The port is receiving or transmitting data.
A 100 Mbps link is present on the port.
The port is receiving or transmitting data at 100 Mbps.
A 1000 Mbps link is present on the port.
The port is receiving or transmitting data at 1000
Mbps.
No link is present on the port.
A 100 Mbps link is present on the port.
The port is receiving or transmitting data at 100 Mbps.
A 1000 Mbps link is present on the port.
The port is receiving or transmitting data at 1000
Mbps.
No link is present on the port.
A link is present on the port.
The port is receiving or transmitting data at 10 Gbps.
No link is present on the port.
(2) AC power output status LED