Sending Data From The Design Tool To The Rip Software - Oki ColorPainter M-64S User Manual

Sending data from the design tool to the RIP software

This procedure describes how to print traffic signs designed in FlexiPRINT & CUT Authorized 3M Traffic Edition for OKI.
1
2
3
44
Printing on reflective sheeting
With the file of the traffic sign you want to
print still open, click the RIP and Print icon.
In the Preset field on the top left of the RIP
and Print screen, select the preset name
containing the name of the reflective
sheeting you want to use.
Notes
‹ The preset specified here must match the preset selected
in the Default Job Property window of Production
Manager.
If reflective sheeting has been newly installed to the
printer or if the type of installed reflective sheeting has
been changed, change the preset to match the reflective
sheeting preset selected in the Default Job Property
window of Production Manager.
Configure the media size, the position and
the other print settings in Layout and the
other panels, and then click Send.
Notes
‹ Do not modify the following parameters.
Output profile/Media/Print mode/Resolution/Color
mode/Dither/Use Color Mapping/Color Adjustment