Registering Your Phone; Registration - Comdial DX-80 User Manual

Overview

1.5 Registering Your Phone

Registration programming allows you to register the handset to the
base unit after it has been installed by your system installer.
1. Power ON the base unit and enter the registration mode on the
base unit.
2. Make sure the handset is in the registration mode.
3. Move the handset close to the base.
4. The system automatically registers the handset and assigns the
handset ID.

1.5.1 REGISTRATION

1. Power on the base unit and enter the registration mode on the
base unit.
2. Turn off the dip switch1 and turn on dip switches 2 and 3.
Note: The down position is on, the up position is off. After 5
seconds the system enters the registration mode.
Note: The LED on the base flashes quickly when the base is in
registration mode.
3. If the handset has not been registered, the LCD displays the
following message.
You can also press and hold the F1 soft key for just over 2 sec-
onds to enter the System Programming mode.
4. Once you are in System Programming mode, the LCD displays
the following.
18
(( ))
PLEASE
REGISTER!
Comdial May '05