National Instruments 6587 Getting Started Manual page 22

Figure 13. Symbols for PXI Express/PXI Express HybridSlots
1. PXI Express System Controller Slot
2. PXI Peripheral Slot
3. PXI Express Hybrid Peripheral Slot
Refer to the chassis documentation for specifications.
3. Remove the filler panel of an unused PXI Express slot.
4. Touch any metal part of the chassis to discharge any static electricity. Place the PXI
Express module edges into the module guides at the top and bottom of the chassis, and
slide the module into the chassis until the module is fully inserted, as shown in the figure
below.
Figure 14. Installing an NI FlexRIO FPGA Module in the PXI Express Chassis
3
1. PXI Express Chassis
2. PXI Express System Controller
3. NI FlexRIO FPGA Module
5. Secure the device front panel to the chassis front panel mounting rail using the front panel
mounting screws.
22 | ni.com | NI 6587 Getting Started Guide
NI PXIe-1062Q
1
2
4
2 3
4. PXI Express System Timing Slot
5. PXI Express Peripheral Slot
1
P X
I - 1
0 0 0
B
5
4. Front-Panel Mounting Screws
5. Module Guides
6. Power Switch
4 5
6